Dale,
Was looking at your photo #1 and made me recall when I was replacing the manifold and reed plate gaskets on my ’54 CD-11. Judging by location of the upper/lower bearing oil feed hose, your motor is a 1958. Looks like the oil feed drilling to the reed plate is in a different location between the ’54 and ’58?
Bob
1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20
1982 Evinrude 25hp
“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."
