Home › Forum › Ask A Member › 25/35 impeller housing know-how › Re: 25/35 impeller housing know-how
September 20, 2015 at 12:04 am
#24228
Did you mean shifting or steering. Not aware steering is involved here. The first thing I do when pulling a gearcase for the first time is shoeshine the shift shaft top and bottom with belt emory tape. You have to get all of the paint out of the way for the gland nuts to move up and down the shift shafts to remove the plastic clips easily. Yes, they are a pain in the butt! As far as the connection, the valves in your car have been held in place that way for over 100 years, though not plastic keepers. Not near the strain here as the valves in your car nor the heat!
Dan in TN