Home › Forum › Ask A Member › HD25 cyl temp › Reply To: HD25 cyl temp
Well I decided to run it in a barrel today and look at the water outlets on the leg as described to me by frankr. I did have some mist coming out which was good to see. I put the temp gun on it saw that it was up at 200 deg again. Now this reading is running at below start, maybe slow. I decided to increase the speed a little above start, and low and behold the temp went down to the 160 deg area! It makes sense that the pump is pumping a greater volume at the higher rpm, which indicated that I no longer had a cooling problem.
Thanks to all those that contributed the great suggestion! Couldn’t have fixed these motors without the experience available by the members at AOMCI.