Reply To: 5.5 hp 1959 Jubilee drips oil

Home › Forum › Ask A Member › 5.5 hp 1959 Jubilee drips oil › Reply To: 5.5 hp 1959 Jubilee drips oil

February 10, 2019 at 10:44 pm #166608
ADAM GIBB
Participant

    Canada Member

    I have fixed them with JB weld, some from inside, some from outside. I clean out the crack and cut a groove with a die grinder and then fill it. On the motors that I like best, I have had them welded. Yes, a purist welder will tell you that the aluminum is saturated with oil, but it only needs to bond well enough to fill. No real strength required.