Reply To: Lockwood Chief Restoration

Home › Forum › Ask A Member › Lockwood Chief Restoration › Reply To: Lockwood Chief Restoration

February 4, 2019 at 9:04 pm #165986
chris-p
Participant

    Working on a coil mod as well. This one is a bit trickier than most, but should not be a problem.

    I plan on first milling down the width to 7/16″, then drilling out the rivets, and removing enough laminates to get it to 7/16″ tall.

    Then I will stagger cut the laminations, just off center, re assemble, and rivet them back together.

    Thats the plan anyways.