Re: Disassembling Merc 4 cyl. W/stuck piston

Home › Forum › Ask A Member › Disassembling Merc 4 cyl. W/stuck piston › Re: Disassembling Merc 4 cyl. W/stuck piston

September 13, 2015 at 4:38 am #23734
Anonymous

    In the past, I have used a brass rod and a hammer to tap to piston out. The piston most likely junk anyways, so if you do damage the piston, no big loss. A piece of delrin(hard plastic) would work as well.