Re: Evinrude 5520 5.5 hp pistons

[Buccaneer]

Thanks for the insight!
Dan, I just put the JB weld on the block…….. no rod thrown!
Mice piss corroded two pin holes through the block.
I don’t remember much trouble getting the dowel pins drove thru the intake
manifold, but they’re sure tight now. The other dowel pin that I didn’t show
is going to be a bugger to drive back, as you can’t get a punch on it straight on.
Frank…….. money always wins, so I bet your correct on the core plug holes!

Prepare to be boarded!