Home › Forum › Ask A Member › 1930 Elto Senior Speedster Lower Unit › Reply To: 1930 Elto Senior Speedster Lower Unit
December 5, 2018 at 8:41 pm
#158783
Knocking the gear case on a block of wood
should get the bearing out. If you happen to
live where the temp. gets down to the teens or
lower leave the gear case outside over night
and see if it will pop out in the morning. Option
two is the freezer. Good luck with that one.
Tubs, I tried slapping the cartridge (with the bearing inside) down
on the workbench several times, but no go.
It’s suppose to get down to 3 degrees tonight, so guessing 20 deg.
in the garage tomorrow morning. Will interrogate it some more in the morning,
and if that doesn’t work, I can throw it in the deep freeze!
Prepare to be boarded!