Reply To: 1930 Elto Senior Speedster Lower Unit

[PM T2]

The aluminum nose cone is not pressed it, in has one slotted screw that holds it in place from the inside. Heating the outside of the cone may allow it to come loose easier. …… and lefty-loosy, eh.

If you’re not using soft jaws in your vise to hold the skeg, consider using pieces of 2 X 4 to avoid leaving unwanted impressions on the skeg.

Hope this helps.

Best,
PM T2

He's livin' in his own private Idaho..... I hope to go out quietly in my sleep, like my grand-dad did..... and not screaming, like the passengers in his car...