Re: OMC remote controls with the big red plug…

[johnyrude200]

OK, now I’m stumped. I tested a control box and it passed all of the functional tests of the service manual, yet the motor will still not shut off when I turn the key to the off position.

I tested the powerpack with a continuity meter and connected to the black/yellow wire from the powerpack and the other meter lead to the ground, and it shows continuity (a little bit of resistance).

I used a known bad powerpack with a faulty stop circuit, and running the same procedure, it showed no continuity between the powerpack ground lead and kill switch lead (black/yellow).

What am I missing here?