Home › Forum › Ask A Member › 9.9/15 impeller housing tricks? › Re: 9.9/15 impeller housing tricks?
I already looked at his website, it is very good. But there are things he has missing too so I decided to float the question out there.
Im digging deeper into the motor as we speak. It has low water flow; installed a new impeller, made sure all the usual things in the gearcase are in order (clean screen, inlet grommit OK).
The telltale only drips water. With thermostat removed and a garden hose hooked up there is water passing through the thermostat seemingly freely.
Thermostat still opens and closes and appears OK. Since I have no replacement gaskets Ill go ahead with a teardown to inspect closer the inlet/outlet exhaust grommits and telltale bypass area for clogs. Will report back.
This is the 1st full teardown on the 9.9/15’s Ive done so it will be educational.