Re: Milemaster pressure tank rebuild

[aquasonic]

Over the winter, I rebuilt two of these tanks. I choose to use gasket sealer on the top cork gasket and coated all four surfaces before assembly. I also coated the eight screws that hold the cast aluminum tank top to the steel tank.

I believe these gaskets came with a gasket sealer from the factory, and the extra seal there can only be a good thing. You don’t want to have a pressure leak or worse, leaking fuel.

On the rubber diaphragm, no sealer was used, just a little grease on the eight diaphragm screws.

Improvise-Adapt-Overcome