Re: Prepping for painting a motor

Home › Forum › Ask A Member › Prepping for painting a motor › Re: Prepping for painting a motor

March 25, 2015 at 1:35 am #12711
david-bartlett
Participant

    Evan,

    It sounds as if your are saying the bolt shaft is stuck to the hole in the head. This is pretty common, and if you can get the head off without damaging it or the block, then you can likely get the bolts out of the block.

    Try some heat(Hot water) and some dead-blow hammer treatment to get the head off. Nothing to lose now.