Home › Forum › Ask A Member › 1958 Lark 35 › Re: 1958 Lark 35
July 31, 2015 at 10:45 pm
#21343
quote Chris_P:
Start in the center, and spiral outwards as you go.
Start at 1/2 torque for a revolution, then 3/4 torque, then the final torque.
The compression relief valves have a gap of 020, or is it 010, Ill have to check the manual. Been a while since Ive gapped one.
Compression release is .020
I would think there would not be a compression release system when using a 40hp head.