Home › Forum › Ask A Member › Evinrude Big Twin 35 hp spark jump › Re: Evinrude Big Twin 35 hp spark jump
July 27, 2015 at 8:31 pm
#21023
Well I don’t believe the plugs are the issue here, I would clean and re-gap the points. Each coil face you look at, will connect to the points on the right. Otherwords, with the flywheel off, and looking at the motor front, the coil for number one is in the front and the points for that coil sit on the right, toward the throttle lever. The coil for number two is facing the rear and the point set is closest to the shifter.