Re: Float Valve P/N’s

Home › Forum › Ask A Member › Float Valve P/N’s › Re: Float Valve P/N’s

July 25, 2015 at 5:52 am #20813
DAN ANDERSON
Participant

    US MEMBER PAY BY CHECK

    It is the hole size in the seat. It has to do with flow. Also application. Think about it. Cross flow V-4, V-6 engines use two barrel carbs with only one needle to feed two cylinders, where as other crabs are single cylinder float bowls. I would have to do the research again now (call BRP) to get the specs, but the cross flows use the biggest hole seats I believe.

    Dan in TN