Re: 1958 Lark 35

[flathead]

Alright, sorry guys, I must be doing a lousy job describing this. When I take the T stat cap off, it blasts water out the top. Fleetwin, I cant post pictures so I’ll try to explain it again. There was 2 chunks of impeller stuck in a channel in the head. If you took the head off, flipped it over so your looking inside it, there is a groove, passage way, channel. I assume it’s for water flow. It’s shaped kind of like the number 8. There are 2 rectangular holes on the bottom. Again I assume for water. Just above those 2 holes, in the groove is where the rubber was stuck.