Re: Cleaning pressure tank before soldering?

Home › Forum › Ask A Member › Cleaning pressure tank before soldering? › Re: Cleaning pressure tank before soldering?

July 16, 2015 at 2:16 am #20213
david-bartlett
Participant

    I got it soldered up. Cleaned the metal really well and soldered a little patch over the hole. Primed, painted. Tank is good.

    While I had it apart, I noticed the CA glue I used on my float was less than perfect, so I may take the time to get some fuel resistant airplane dope and try that. It could just be that the CA did not have time to cure properly before I used it.