Re: Problem with my float

[wyo307]

Thank you guys for the replies. I will have to take it back apart tonight and see if I can find something wrong. My next question is where/how do I set the mixture knob and the little lever behind it (102019) so that they are adjusted correctly? Right now I screwed the mixture knob all the way in till it was just barely bottoming out. At this location I set the knob so it was pointing at "lean". Then I rotated out so that it was pointing at "prime" and set the other one (102019) so that it was pushing the poppet valve all the way up. Is this the correct setup? Thanks again for the help.